Products Categories
Contact Us
ADDRESS:No.133 Yaozhai Road, Jincheng Times Square Jinshui District, Zhengzhou City ,Henan Province, China
MOBILE:+8615670233721
TEL:+86-371-58689777
E-MAIL:info@ms-laser.com

Fractional CO2 Laser Equipment

Fractional co2 laser equipment uses a new integrated dot matrix technology that directly penetrates the lattice energy into the skin, then stimulates the production of collagen. It applies energy in segments and then ensures that the lattice energy is evenly covered, avoiding spot overlap....

Send InquiryChat Now

Product introduction

Fractional co2 laser equipment uses a new integrated dot matrix technology that directly penetrates the lattice energy into the skin, then stimulates the production of collagen. It applies energy in segments and then ensures that the lattice energy is evenly covered, avoiding spot overlap. It can solve the problem of dull and dull skin, dark complexion, pigmentation, sagging skin, fine wrinkles, redness of the face, large pores and other skin problems. It allows the patient to remove wrinkles in the shortest time, smooth the scars, and make the skin reproduce smooth and delicate.

image003.jpg


Principle

It uses a high-energy penetrating wavelength 10600nm carbon dioxide laser, combined with fractional laser technology, to convert the laser into a 0.12nm diameter beam. The beam penetrates into the bottom layer of the skin, and the moisture of the surface layer and the dermis absorbs the laser energy, allowing the skin and scar tissue to evaporate rapidly, and stimulating skin tissue and collagen regeneration and reorganization. Since the action area of the microbeam is very small, most of the treatment areas can be recovered in a short period of time, reducing the risk of bacterial infection and avoiding side effects. 

image005.jpg

image007.jpg


 

Advantage:

1. Easy to operate, no additional methods are needed after treatment.

2. Dot matrix laser uses a dot matrix system. Using the laser to ablate the tissue, micropores with a diameter of micrometers can be made on the skin. These micropores can be closed within one day after treatment, and are hard to see with the naked eye. Leakage, bleeding and infection are rare.

3. The dot laser has strong penetrating power and low trauma, and ensures uniform coverage of the micro-holes of the dots, avoiding the overlap of the spots. Therefore, it is the most suitable laser for comprehensive treatment, so that your skin can quickly restore a smooth image.

4. During treatment, the laser directly penetrates into a matrix of small white spots. The skin around these small points immediately initiates a lateral repair mechanism, and the epidermis will heal completely within 8 hours.

5. The operation is simple, the treatment is efficient and safe, and there is no need to rest after surgery, which does not affect the work.

6. Non-exfoliating treatment, no pain, short time, no adverse reactions, especially suitable for young and middle-aged people.

image009.jpgimage011.jpgimage013.jpg


Treatment range:

1. Laser wrinkle: a tightening and lifting the skin. nbspb Improve facial wrinkles (frontal lines, eyebrow lines, perioral wrinkles), eyelids, crow's feet and other fine lines around the eyes, remove stretch marks.

2. Laser sputum, acne pits, traumatic scars, surgical scars, burn scars, acne scars and other deep scars.

3. The skin is slack, the skin falls, the skin becomes thinner, and the pores are thick.

4. Rosacea, sebaceous gland hyperplasia, border sputum, chloasma.

5. Pigmentation, actinic cheilitis, hemorrhoids

6. Large pores, rosacea, benign hyperplasia

7. Epidermal pigmented lesions (freckles, age spots)

8. Epidermal growth

image015.jpgimage017(001).jpg


Treatment effect: 

image019.jpgimage021(001).jpgimage023.jpg

image025.jpgimage027.jpg


Product parameters

Laser type

glass tube laser (4 class)

Light guide system

seven joint (Korean selection)

Laser power:

15W (18W, 20W selection)

Laser working mode:

continuous and ultra pulse

Output mode

continuous and super pulse

Focal spot diameter

100um-2000um (determined by zoom lens tube)

Laser wavelength:

10600nm

Pulse interval:

1ms-5000ms (adjustable)

Pulse width:

0.1ms-10ms (adjustable)

Pulse energy:

0.1mj-180mj (adjustable)

Point spacing:

0.1ms-100ms (adjustable)

Aiming light wavelength:

635 nm

Input power:

400W

Aim light power:

less than 5MW

Fixed focus

Mirror

50mm (100mm selection)

Scanning mode

sequence / disorder / medium

Storage temperature:

-10℃ -60℃

Refrigeration system:

air cooling / water cooling

Working voltage:

AC:220V + 10%, 50Hz;

110V + 10%,

50Hz (export-oriented)

Spot pattern:

single mode

Operating system:

8 inch real color smart touch screen

Chassis material:

ABS engineering environment-friendly insulation medical case

Logistics quality:

33.5kg

Insurance specification:

Max10A

Equipment size:

700*350*300 (mm)

Logistics size:

900*630*390  (mm)


Accessories picture

image027(002).jpgimage029.jpg


Payment, shipping and delivery

Payment:bank transfer、T/T

Shipping:DHL/TNT/UPS/FEDEX

Delivery: around 7-9working days

image033.jpg


Hot Tags: fractional CO2 laser equipment, suppliers, manufacturers, factory, SPA
Related Products
Learn More Information About Our Products Know More
Copyright © Mescien Electronic Technology Ltd All Rights Reserved.